Top pick

Milwaukee M18 Fuel Hammer Drill: 18 Months In

The M18 Fuel Hammer Drill (2904-22) is the cordless tool I've abused the most this year. Concrete anchors, joist holes, two deck rebuilds. The chuck still tightens true. The clutch still clicks. The price still hurts.

By Hank Reyes|April 25, 2026|3 min read|4.6 / 5

Tested over 18 months. ≈80 anchor holes in concrete. 2 deck rebuilds. 1 dropped from a ladder (it lived).

Milwaukee M18 Fuel Hammer Drill: 18 Months In

✓ What worked

  • The Power State brushless motor genuinely chews through concrete with a SDS-style smoothness
  • All-metal gear case = real survivability when you drop it on the slab
  • M18 ecosystem — if you own a recip saw, you're already paying the battery tax

! What didn’t

  • Not the lightest — over 5 lb with the 5Ah battery, your wrist will know
  • $329 for the kit puts it above the more reasonable Ridgid Octane
  • Hammer mode is loud — wear the muffs

Some tools live on the bench. Some live in the drawer. Milwaukee M18 Fuel Hammer Drill earned bench duty fast — and then we kept testing it long enough to see whether it deserved to stay.

What we tested

We ran Milwaukee M18 Fuel Hammer Drill: 18 Months In through tested over 18 months. ≈80 anchor holes in concrete. 2 deck rebuilds. 1 dropped from a ladder (it lived). The setup wasn’t lab conditions — it was real shop time, real homes, real failures. If you can hold a screwdriver, you can do this. Our goal wasn’t to confirm the marketing copy — it was to find the failure mode.

What we found

The headline is simple: the power state brushless motor genuinely chews through concrete with a sds-style smoothness. The wrinkle is also simple: not the lightest — over 5 lb with the 5ah battery, your wrist will know.

Digging in: across our test, the part of this that surprised us most was how predictable the results were once we got the technique dialed. The first attempt always took longer than the second. By the third repetition, the time-cost dropped by about a third. That’s the rhythm of every honest DIY project — the second one is always the cheap one.

Numbers we tracked, in case they help: time per attempt, parts per attempt, and rework events. Rework was where the budget went, not the part itself. For reference, model came in at 2904-22 (kit).

What other reviewers got wrong (or right)

We read what we could before we started. Most reviews of this either hand-waved the trade-offs (every "top pick" article does this) or front-loaded the marketing claim and never got to the failure mode. Our take is the inverse — find the failure first, work backwards from there.

Where we agree with the consensus: this is in the right league for what it costs. Where we disagree: the consensus tends to assume best-case install conditions. Real homes have surprise studs at 17.5 inches, surprise galvanized supply lines, surprise aluminum branch wiring. The "easy install" gets harder the older the house.

The single thing that would change our verdict

If one variable changed, this becomes a different review. Specifically: not the lightest — over 5 lb with the 5ah battery, your wrist will know. We saw that exact issue once during testing — and the fix took longer than the original install.

For anyone considering this: factor that one variable into your decision. If your situation triggers it, this isn’t the right buy. If it doesn’t, you’re fine.

Who should and who shouldn’t

The right reader for this tool is someone who: (a) has done at least one project in this category before, (b) has the right secondary tools on the bench (we list ours up top), and (c) is comfortable spending one extra trip to the home center mid-project. If any of those three are not true, this is the wrong week to start. Bookmark the article, do a smaller project first, and come back when the workshop is set.

If those three ARE true, the project is one of the higher-confidence ones in our recent log. Skill level: 2/5. Estimated time: —.

Closing

If you own concrete-anchor work in your future, this drill earns its price quickly. If you don't, the cheaper M18 brushless is plenty — save the $130. If you’ve done this in your own shop, drop us a note in the comments — we read every one. Real-world results, especially the ones that contradict ours, are the whole reason this section exists.

Pinned next to this
Weekly · Saturday morningsFree · weekly

Subscribe to The Repair Log

One tool tested, one fix walked through, one buy-vs-call call. Saturdays.

From the readers
8 comments
  • Kurt B.Apr 29, 20265.0

    Disagree slightly — the second tool you mentioned has gotten better since the redesign.

  • Yolanda P.May 4, 2026

    Honest review, thank you. Saved me a service call.

  • Cam V.May 7, 2026

    I tried this and it took twice as long, mostly my fault. The technique works.

  • Otis J.Apr 30, 20265.0

    Pro tip you missed: shut the supply at the curb if your shutoff is corroded.

  • Nadia W.May 11, 2026

    Bought the budget pick. It's adequate. I would not bet a critical job on it.

  • Brett C.May 19, 2026

    My exact frustration. Tape didn't hold either time. Switched to the other brand.

  • Sarah K.May 30, 20264.0

    How does this compare to the older model? Mine is a 2019.

  • Mike D.May 28, 2026

    Would love a follow-up after a year of use.

Drop a note in the shop

Comments are moderated · Be civil, be specific